How unit conversion works
Converting units changes the scale used to express a measurement without changing the physical quantity itself. For example, 1 inch and 2.54 centimetres describe the exact same length.
The golden rule of unit conversion (dimensional analysis) is to multiply by a conversion ratio set up so the old unit cancels out, leaving only the target unit.
By international agreement since 1959, 1 inch is defined as exactly 2.54 centimetres, and 1 pound is defined as 0.45359237 kilograms.
The unit conversion factor formula
For any linear measurement (length, mass, volume, or area), multiply the starting value by the ratio of target units per starting unit:
Target Value = Starting Value × Conversion Factor
- Starting Value is the measurement in your original unit.
- Conversion Factor is how many target units equal 1 original unit (e.g., 2.20462 lbs per 1 kg).
Step-by-step example
Let's walk through converting 70 kilograms (kg) to pounds (lbs).
Find the conversion factor between kg and lbs:
1 kilogram (kg) = 2.20462 pounds (lbs)
Set up the multiplication so kg cancels out:
Weight in lbs = 70 kg × 2.20462 lbs/kg
Multiply and round to a sensible precision:
70 × 2.20462 = 154.3234 lbs
Final answer:
70 kg = 154.32 lbs
70 kilograms in pounds:
154.32 lb
Always sanity-check the magnitude and sign before trusting a raw number
Calculators execute exactly what you type, which means a misplaced negative sign or parenthesis changes everything. For instance, −4² in strict operator precedence means −(4 × 4) = −16, whereas (−4)² means (−4) × (−4) = +16. Similarly, when averaging a dataset with one extreme outlier (like home prices on a block with one mansion), check the median alongside the mean so a single huge number doesn't skew your conclusion.
Rounding intermediate steps too early
If a multi-step formula produces 0.333333 in step one, keep full precision until the final line. Rounding to 0.3 midway can introduce a 10% drift by the end of the problem.
Estimate the ballpark in your head first
Before reading the exact decimal, round the inputs to easy whole numbers to predict the rough size of the answer. If you expect ~150 and see 1,500, you immediately spot a slipped decimal.
How to convert Celsius (°C) and Fahrenheit (°F)
Temperature scales have different zero points (water freezes at 0°C but 32°F), so converting between them requires both multiplication and an offset:
°F = (°C × 1.8) + 32 | °C = (°F – 32) ÷ 1.8
Worked Scenario: Convert 25°C (room temperature) to Fahrenheit:
- Multiply by 1.8 (or 9/5): 25 × 1.8 = 45
- Add 32: 45 + 32 = 77°F
- Reverse check: (77 – 32) ÷ 1.8 = 45 ÷ 1.8 = 25°C
Convert length, weight, temperature, and volume instantly with the Unit Conversion Calculator.
Moving decimal points across metric prefixes
The metric system is base-10, meaning you can convert between millimetres, metres, and kilometres simply by shifting the decimal point:
1 km = 1,000 m | 1 m = 100 cm = 1,000 mm
Worked Scenario: Converting 3,450 millimetres into metres:
- There are 1,000 mm in 1 m
- Divide 3,450 by 1,000 (move decimal 3 places left)
- 3,450 mm = 3.45 m (or 345 cm)
Need to convert room dimensions for a renovation project? Try the Flooring Project Calculator.
Common Conversion Factors Reference Table
| From Unit | To Unit | Exact / Standard Factor | Quick Example |
|---|---|---|---|
| Inches (in) | Centimetres (cm) | Multiply by 2.54 | 10 in = 25.4 cm |
| Feet (ft) | Metres (m) | Multiply by 0.3048 | 10 ft = 3.048 m |
| Miles (mi) | Kilometres (km) | Multiply by 1.60934 | 5 mi = 8.05 km |
| Kilograms (kg) | Pounds (lbs) | Multiply by 2.20462 | 70 kg = 154.32 lbs |
| Gallons (US) | Litres (L) | Multiply by 3.78541 | 10 gal = 37.85 L |
Common mistakes
- Multiplying when you should divide (check whether the target unit is smaller or larger than the starting unit).
- Forgetting to square the conversion factor when converting area (1 m = 3.2808 ft, so 1 m² = 3.2808² = 10.764 sq ft).
- Confusing US fluid ounces/gallons with UK Imperial fluid ounces/gallons.
- Subtracting 32 after dividing by 1.8 when converting Fahrenheit to Celsius (always subtract 32 first).
- Writing 12 inches per foot as base-10 decimals.