Choose Your Construction Workflow
Select a project shape below. Your measurements flow automatically through all four calculation stages.
Enter Project Measurements
Before calculating area or volume, all inputs are normalized to a common base unit so mixed units (like feet for length and inches for slab thickness) compute accurately.
- Normalized Length:
- 15 ft (4.57 m)
- Normalized Width:
- 12 ft (3.66 m)
Base Material Quantity (Before Waste)
Exact geometric area or volume calculated from your normalized Stage 1 measurements.
Adjust Material Waste Allowance
Formula: Adjusted Quantity = Base Quantity × (1 + Waste Percentage ÷ 100)
- Base Quantity:
- 180 sq ft (ft²)
- +10% Waste Buffer:
- +18.00 sq ft (ft²)
- Adjusted Total:
- 198.00 sq ft (ft²)
Package Count & Estimated Material Cost
- Enter the coverage per package/box from your product label to calculate how many packages to buy.
- Enter the price per package/box to estimate total material cost.
Construction Formulas, Figuring Yards of Concrete & Material Reference
Every stage of this workflow uses standard geometric formulas after normalizing all measurements to a single base unit.
Area = Length × Width (Sq Ft = Linear Ft × Width in ft)
1 square yard = 9 sq ft. 1 square meter ≈ 10.7639 sq ft. A standard 4×8 plywood sheet covers 32 sq ft.
Cubic Yards (yd³) = (Sq Ft × Depth in ft) ÷ 27
For 1,000 sq ft: at 4 in slab thickness, volume is 12.35 yd³ (1,000 × 4/12 ÷ 27); at 3 in mulch depth, 9.26 yd³. 1 yd³ of crushed gravel weighs ≈ 1.35–1.42 US tons.
Volume = π × (Diameter ÷ 2)² × Depth × Holes
An 80-lb bag of premixed concrete yields about 0.60 ft³ (45 bags per yd³), and a 60-lb bag yields 0.45 ft³ (60 bags per yd³).
Compacted gravel subgrades are rarely laser-flat: if your excavation dips from 4.0 inches to just 4.5 inches in the center of the patio, your concrete volume increases by 12.5% across that zone. Including a 5% to 10% subgrade waste buffer helps prevent running short on a ready-mix pour.
One cubic yard (27 ft³) requires 45 bags of 80-lb concrete (at 0.60 ft³ yield per bag, totaling 3,600 lbs). For pours under 1.0 yd³, bagged concrete is commonly used because ready-mix suppliers often apply minimum load fees below 3 to 4 cubic yards.
Frequently Asked Questions About Concrete, Cubic Yards & Bags
Multiply Slab Length (ft) × Width (ft) × Thickness in feet (Inches ÷ 12) to get cubic feet, then divide by 27 to convert to cubic yards. For a 10 ft × 10 ft slab at 4 inches thick: 10 × 10 × (4 ÷ 12) ÷ 27 = 1.23 cubic yards.
One cubic yard (27 ft³) requires forty-five 80-lb bags (0.60 ft³ each), sixty 60-lb bags (0.45 ft³ each), or ninety 40-lb bags (0.30 ft³ each).
At 4 inches (0.333 ft) thick, 1,000 sq ft requires 1,000 × (4 ÷ 12) ÷ 27 = 12.35 cubic yards net, or about 13.5 cubic yards after adding a 10% subgrade waste buffer.
One cubic yard of compacted crushed gravel or driveway stone weighs about 1.35 to 1.45 US tons (2,700–2,900 lbs). Dry sand weighs ~1.35 tons/yd³, and screened topsoil weighs ~1.05 to 1.20 tons/yd³.
A standard 10-inch diameter hole dug 30 inches (2.5 ft) deep has a cylinder volume of 1.36 ft³, which takes about two and a half 80-lb bags or three 60-lb bags per post.
Because 1 cubic yard equals 27 cubic feet, divide 27 by 2 ft³ per bag = 13.5 bags (round up to 14 bags per cubic yard).
Excavated dirt and gravel subgrades often dip by 0.25 to 0.5 inches across a span, and wooden forms bow slightly under wet concrete pressure. Ordering 10% extra prevents a costly short-load callback.