Calculate exact hours, minutes, and decimal payroll hours between two clock times.
Enter your start time, end time, and unpaid break minutes to find net duration and payroll decimal hours.
Shift or event start (e.g. 09:00)
Shift or event end (e.g. 17:30)
Unpaid break (e.g. 30 min)
Duration from 09:00 to 17:30 (−30m break) is:
The formula to calculate net time duration and payroll decimal hours is:
Shift from 09:00 to 17:30 with a 30-minute break:
Time math uses base-60 (sexagesimal) for minutes and seconds, and base-24 for hours. To find the duration between 08:45 AM and 05:15 PM, convert both timestamps into total minutes since midnight: 08:45 is 525 minutes (8 × 60 + 45) and 17:15 is 1,035 minutes (17 × 60 + 15). Subtract 525 from 1,035 to get 510 minutes—which divides by 60 into 8 hours and 30 minutes (8.50 decimal hours).
If your clock-out time is earlier than your clock-in time (such as a 10:00 PM to 06:30 AM hospital or warehouse shift), add 1,440 minutes (24 hours) to the end time before subtracting.
Under US Department of Labor (29 CFR § 785.48) rules, employers that round timecard punches to the nearest quarter-hour (15 minutes) must use the 7-minute split so rounding averages out fairly over time. Punches from 1 to 7 minutes past the quarter-hour round back down (e.g., 8:06 AM → 8:00 AM = .00), while punches from 8 to 14 minutes round forward (e.g., 8:08 AM → 8:15 AM = .25).
Payroll systems multiply hourly wage by base-10 decimals. Typing 8.30 pays for 8 hours and 18 minutes (0.30 × 60 = 18m), shorting the worker 12 minutes of pay every single shift.
For any minute count, divide by 60: 12 minutes = 0.20 hrs, 20 minutes = 0.33 hrs, 36 minutes = 0.60 hrs, and 48 minutes = 0.80 hrs.
Standard conversion table used by payroll processors, legal billing (1/10th hour = 6 min), and contractor timesheets.
| Clock Minutes | Payroll Decimal (÷ 60) | 15-Min Quarter Rounding | Legal 6-Min Tenths |
|---|---|---|---|
| 06 Minutes | 0.10 Hours | Rounds to .00 (0m) | 0.1 Billable Hour |
| 15 Minutes | 0.25 Hours | Exact .25 Quarter | 0.3 Billable Hours (18m) |
| 24 Minutes | 0.40 Hours | Rounds to .50 (30m) | 0.4 Billable Hours |
| 30 Minutes | 0.50 Hours | Exact .50 Half-Hour | 0.5 Billable Hours |
| 45 Minutes | 0.75 Hours | Exact .75 Three-Quarter | 0.8 Billable Hours (48m) |
| 54 Minutes | 0.90 Hours | Rounds to 1.00 (60m) | 0.9 Billable Hours |