Calculate Voltage (V), Current (I), Resistance (R), and Electrical Power (W) for DC and resistive AC circuits.
Select the target variable you want to solve for and enter your known values.
1 A = 1,000 mA
1,000 Ω = 1 kΩ
Voltage & Power for I = 2 A and R = 6 Ω is:
Electrical Power (P = V × I): 24 Watts (0.024 kW)
Quick lookup for converting clock minutes to decimal payroll hours and standard metric lab prefixes.
| Clock Minutes / Prefix | Decimal Hours / Multiplier | Scientific Notation | Everyday Example |
|---|---|---|---|
| 15 Minutes (Quarter Hour) | 0.25 Hours | 15 ÷ 60 = 1/4 hr | 7h 15m = 7.25 decimal hrs |
| 30 Minutes (Half Hour) | 0.50 Hours | 30 ÷ 60 = 1/2 hr | 8h 30m = 8.50 decimal hrs |
| 45 Minutes (Three-Quarter) | 0.75 Hours | 45 ÷ 60 = 3/4 hr | 8h 45m = 8.75 decimal hrs |
| Milli- (m) → Base Unit | ÷ 1,000 (0.001) | 10⁻³ | 500 mL = 0.500 L; 250 mg = 0.250 g |
| Kilo- (k) → Base Unit | × 1,000 (1,000) | 10³ | 2.5 kg = 2,500 g; 1.2 kW = 1,200 W |
Before plugging numbers into any physical or time formula, check that every input shares the same base unit family. In Molarity (M = mol ÷ L), a 250 mL beaker must be entered as 0.250 L—entering 250 directly makes your concentration 1,000 times too small. Likewise, in payroll time duration, 8 hours and 30 minutes is 8.50 decimal hours, never 8.30.
Because an hour has 60 minutes, 15 minutes is 0.25 hrs, 30 minutes is 0.50 hrs, and 45 minutes is 0.75 hrs (45 ÷ 60). Writing 7.45 instead of 7.75 shortchanges 18 minutes of pay.
If your scale reads to 2 decimal places (12.45 g) and your graduated cylinder reads to 2 significant figures (50 mL), round your final reported lab answer to match the least precise measurement.
Ohm’s Law and Joule’s Power Law govern electrical circuits:
Find voltage and power for a 2 A current through a 6 Ω resistor:
Ohm’s Law states that the electrical current (I, in Amperes) flowing through an ideal conductor is directly proportional to the applied voltage (V, in Volts) and inversely proportional to resistance (R, in Ohms). Simultaneously, electrical power (P, in Watts) equals Voltage multiplied by Current.
When sizing physical resistors, always choose a power rating (e.g., 1/4 W, 1/2 W, 1 W) at least 2× higher than the calculated heat dissipation P.